Pos

Description

1

Extruder

Vacuum Loading system brand: Shini TAIWAN

Brand of screw barrel: Golden conch   

Dia. of screw: Φ120mm

L/D of screw: 33:1  

Screw material: Nitride 38GrMoAl

Max. rotation of screw: 115r/min

Max. extrusion: 550kg/h (Depending upon tape characteristics and material)

Barrel heating use aluminum heater, solid relay control the heating

Barrel heating total power and heating zones: 52.5KW 7zones

Die-head using built-in stainless steel heating pipe and solid-state relay

T-die brand: Jing Cheng

Length of die-head:1300mm

Effective length:1200mm

Exceed film thickness: 0.07-0.35mm

Die-head total heating power and heating zones: 15kw  5zones

Melt pump brand: Maag  11kw

Siemens AC motor  

Main motor: Siemens AC motor

Motor power: 160kw

Screen change method: Auto-belt change screen (Double-net)

1

Cooling water tank

Material: stainless steel

The tank up and down adjustable

Manual up and down adjust by chain wheel

1

Haul-off unit

Water remove plate 2sets

Water snap system 1set  motor power 3kw

Film lifting system    1set motor power  kw

Water absorb system 2sets

Water absorb motor power 3kw.

1

Slitting system

Slitting shaft type: 6 side blade rotate

Specification: non-stop changing blade, can be adjust up & down, and right & left.

1

Dr押球官方网站ing unit

Roller external dia.: 420mm

Roller surface treatment：hard chromium plating , glazingTreatment

Dr押球官方网站 unit Motor power: 7.5kw

Max. Line speed: 80m/min

1

Edge-film crushing recycling system

For direct return of narrow edge trims of non-stretched film into the extruder, consisting of a shredding mill with blower, piping, and air separator    

Shredding mill motor                     2.2kw

Blower motor                           2.2kw

Blower speed                           2840rpm

Rotate blade speed                      1430RPM

Crushing capacity                       20kg/h

1

Double-lay stretching hot air oven

Oven length: 6000mm

Oven width: 1600mm

Effective using width: 1350mm

Heating power: 80kw

Max. air speed: 10-20m/s

Motor: Siemens

Fan power: 7.5KW×2sets

Fan rotation speed: 1440r/min

Up oven pneumatic open

Heating using built-in heating pipe and power regulator

1

8 roller stretching unit

Roller size: Φ420mm (Bearing SKF)

Roller surface deal: Plate Cr, mirror deal (Equip safety cover)

Stretching 4 roller power : 18.5kw

Max. Line speed : 450m/min

Water chilling two roller motor power: 5.5kw

Heating power of mold temperature controller 24kw

Oil heating two roller motor power: 5.5kw

1

Waste yarn collection system

Motor power 15kw

216

Winder

ATA600DH   216 Spindles

According to different yarns, choose different winding parameters by setting of user  independently, perfect spindles, wide usage;

Adopting continuous winding technique, make sure the constant tension of the whole spindle, reduce yarn breakage rate  in circular loom, reduce deviation of fabric width;

Max. Winding Diameter up to 180 mm, reduce times to change spindles strongly, save labors, increasing usage time of warp yarn;

Simple structure, little amounts of fast moving spareparts, high intellectualization.